Mcc ASTM D7309 Microscale Combustion Calorimeter by Microscale Combustion Calorimetry

MCC ASTM D7309 Microscale Combustion Calorimeter can determine the basic thermo-chemical data, such as Specific Heat Release rate, combustion calorific, Ignition Temperature, by testing very little specimen (1-10mg)  in a few seconds, and predict the combustion retardant characteristics of the tested material.

1. Specimen size: 1-10mg, (typical specimen quality is 2-5mg), supply with precise balance with measurement range of 42g, 0.01mg.
2. Size: H:1570*W343*D663mm
3. Specimen heating speed: 0-2K/S
4. N2: 99.5% purity, pressure: 20 - 25 PSI
5. O2: 99.5% purity, pressure: 20 - 25 PSI

1. Anaerobic and aerobic pyrolysis;
2. Fast test speed, convenient for determine, it can finish the testing within several minutes;
3. High precise MFC(Mass Flow Controller) to control O2 and O2 flow: measurement range 20-200cm3/min ; Response time less than 0.1S, accuracy: F.S±1%;
4. O2 sensor measurement range:0-100%, T90<6S, ±0.1%, accuracy: F.S±1%;
5. There is temperature sensor under the sample cup;
6. Automatically remove the sample cup into the combustion furnace;
7. Combustion furnace: Programmable control the heating temperature to specified temperature, swift of the temperature below 5K/h, with over-temperature protection function;
8. Temperature range: Room temperature-1000 ºC ; imported heating wire; high performance kantha A-1 heating element;
9. With multiple cooling devices which is convenient for thermal dissipation;
10. LABVIEW software, PC and printer are optional, the software has following functions:

1. Display the running status of the equipment;
2. Calibrate the equipment and store calibration results;
3. Collect testing data;
4. Calculate heat release rate(W/g), combustion calorific(J/g), Ignition Temperature(°C);