Rebot NiMH 2200 mAh AAA/AA/SC/C 6V 7.2V Replacement NiMH Battery Cells Rechargeable NiMH Battery Pack Stick Shape for Wireless Electrics Lighting Power Supply
| Description | Unit | Specification | Conditions | |
| Nominal Voltage | V/ Cell | 1.2 | Unit cell | |
| Nominal Capacity | mAh | 2200 | Standard Charge/Discharge | |
| Standard Charge | mA | 220 (0.1C) |
Ambient Temperature:
T a = 20 ± 5 ºC |
|
| Hour | 16 | |||
| Trickle Charge | (0.0 3 C)~(0. 05 C) | T a = 0~ 45ºC | ||
| Standard discharge | mA | 440 (0.2C) |
Ambient Temperature:
T a = 20 ± 5 ºC Humidity : Max : 85% |
|
| Discharge Cut-off Voltage | V/ Cell | 1 .0 | ||
| O perating temperature range | ºC | 0~ 45ºC | Humidity : Max : 85% | |
| Storage Temperature | ºC | - 2 0~ 35ºC | 1 year | Fully charged state , Humidity , Max. 60 % |
| 0 ~ 60ºC | 1 week | Fully charged state , Humidity , Max. 80 % | ||
| Typical Weight | g | Approx. 35.0 | ||
|
Test
|
Unit
|
Specification
|
Other Condition
|
Remarks
|
|
Capacity
|
minute
|
≥
290
|
Standard Charge Discharge
|
up to 3 cycles
are allowed
|
|
Open Circuit
Voltage(OCV)
|
V/Cell
|
≥
1.25
|
Within l hour after standard Charge
|
|
|
Internal
Impedance
|
m
Ω
/ Cell
|
≤
35
|
Upon fully charge(lKHz)
|
|
|
High Rate
Discharge(0.5C)
|
minute
|
≥
96
|
Standard Charge, l hour rest Before
Discharge by 0.5C to 1.0 V/cell
|
up to 3 cycles
are allowed
|
|
Overcharge
|
No leakage nor
explosion
|
0.1C Charge14 days
|
||
|
Charge
Retention
|
mAh
|
≥
1320(60%)
|
Standard Charge, Storage
:
7 day
rest at 45Ambient Temperature
,
Standard Discharge
|
|
|
IEC Cycle Life
|
Cycle
|
≥
500
|
IEC61952-2(2003)7.4.1.1
|
|
|
Leakage Test
|
No leakage nor
deformation
|
Fully charged at 0.5C for 2.5 hour
stand for 14 days. 0.5C
|
||
|
Security Test
|
No explosion
,
but
leakage or deform
ation is allowed
|
Charge the cell 0.1C 16hrs
,
Then
≤
100 m
Ω
Impedance short
circuit for 1hour
|
Ambient
Temperature:
T=20 ±5ºC |
|
|
Impact
Resistance
|
Change of voltage
should be under
0.02V/ Cell Change
of impedance
should be under 5 m
Ω
/ Cell
|
Charge the cell 0.1C 16hrs
Then leave for 1~4hrs,check
battery before/after dropped,
Height 50cm
Wooden board (thickness 30mm)
Direction not specified,3 times.
|
Ambient
Temperature:
T=20 ±5 ºC |
|
|
Vibration
Resistance
|
Change of voltage
should be under
0.02V/cell,Change
of impedance should
be under 5
milliohm/cell
|
Charge the battery 0.1C 16hrs,
then leave for 24hrs,check
Battery before/after vibration,
Amplitude 1.5mm
Vibration 3000
CPM, Any direction for 60mins.
|
Ambient
Temperature:
T=20 ±5 ºC |
Q:How long is the warranty?
A: 4 years.
Q:Do you accept OEM/ODM?
A: Accept
, send us your requirement
/draft
,
we
will produce battery
according to your requirement
/draft.
Q:What
'
s your payment method?
A:We accept T/T(30% deposit,and 70% balance before shipment).
Q:What's the price terms?
A:We accept FOB JIANGMEN/HONG KONG/DDP/EXW.
Q:What is the lead time for mass production?
A:22-25 days after order confirmed.
Q:Can you provide samples before place order?
A:Yes,we can provide samples and data sheet for your testing first.
Q:How do you ship batteries?
A:We can ship batteries by SEA/AIR which according to your requirement.
We advised ship by SEA which more cost-effective.
Q:What kind of certificate do you have?
A: We have CE, CB,
IEC,KS,
RoHS, SGS, MSDS, ISO9001, TUV certificates and reports
,also can apply certificates according your needed.
Q:How do we place an order?
A:Send us an Inquiry or text us,we will instruct you to place an order.
Q:What
'
s the order procedure?
A:Send us Enquiry→battery detail and price confirmed→send purchase order to us→Pay Deposit 30%→Battery production→Pay Balance payment 70% before shipment→Battery send out.